[c-nsp] 6509 OIR logging for transceivers

[Tim Jackson]

We use rancid and "show inentory raw" command 2x an hour to log approx
when an SFP was inserted/removed...

Best way I've found to do it... It also nabs your serial numbers.
--
Tim

On Mon, Dec 14, 2009 at 8:00 PM, Brian Spade <bitkraft at gmail.com> wrote:
> Hi,
>
> I am doing some testing and can't seem to get the Catalyst 6509 to log an
> insertion or removal of a SFP.  Is this supported?  I have 'logging buffered
> 20000' configured but don't get a log when I insert/remove an SFP on a
> SUP-720-3B.
>
> Thanks,
> /bs
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>