[c-nsp] NAT-Device with authentication ?

[Brian Raaen]

Try searching for Document ID: 13890.  It is about setting up auth-proxy with 
nat.  If you can't find it I can send you a pdf I had downloaded.

-- 

----------------------

Brian Raaen
Network Engineer
braaen at zcorum.com



On Wednesday 16 December 2009, Andreas Mueller wrote:
> 
> 	Hello,
> 
> are there any (cisco)-NAT-devices which enable the NAT after the user 
> has done some kind of authentication - which is checked against a 
> radius-server or an active directory for example ? What I need is like a 
> captive portal connected to a NAT-device.
> The scenario I try to have is: The user will get its IP-address from a 
> private IP-range via DHCP after connecting his computer to the network.. 
> With this address he should be able to connect to services within his 
> internal network. But to connect to computers outside his network he 
> should authenticate himself.
> 
> 	thanks for hints && greetings,
> 
> 		Andreas
> 
>