[c-nsp] clue-bat requested for v6 loopback into IGP

[Steve Bertrand]

After a long day, I'm certain that I'm missing something simple. I'm
trying to get a loopback address advertised into OSPF, after a direct
ptp setup has already been established ( I can ping6 from ptp interface
to ptp interface ).

I'm working from a C2961, and in this case, its peer is Quagga. I have
done this setup many times before between both Cisco->Quagga and
Cisco->Cisco:

O>* 2607:f118:1::e1/128 [110/1] via fe80::216:9dff:fe92:1700, em3.300,
3d06h48m
O>* 2607:f118:1::e2/128 [110/1] via fe80::209:e8ff:fe43:9f00, em6, 03:26:06
O>* 2607:f118:1::e3/128 [110/2] via fe80::21a:70ff:fe14:568a, em5, 04w2d06h

[...snip...]

O>* 2607:f118:1::ff0/128 [110/1] via fe80::20a:f4ff:fe0b:b109, em2.98,
03:17:14

The above are loopbacks within the IGP. I'm having a problem getting
::ff1/128 included.

I've been comparing rtr configs, but am still missing something due to
being over-tired. Can someone clue-bat me with a fresh approach on how
to look at this?

Steve

ps. usually things just 'click' after I send out a public message, so
here's to trying ;)