[c-nsp] PPPoE Requirement!

[Arie Vayner (avayner)]

Asad,

Yes, client initiated L2TP on the CPE router could do it if you want to
have a PPP session and do normal PPP authentication on the BRAS.
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtvoltun.
html

Another option could be to just run a static GRE tunnel from the CPE to
the "BRAS" (which in this case would not rally be a BRAS...)

It really depends on what you want to achieve.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Asad
Sent: Wednesday, December 23, 2009 06:32
To: cisco-nsp at puck.nether.net
Cc: cisco-bba at puck.nether.net
Subject: [c-nsp] PPPoE Requirement!

Dear Friends!

 

I have the following scenario. 

 

(Customer Cisco Router)------Ethernet-----[Routed CPE]-------RF
Media---------(ISP Cisco Router)------Ethernet-------(ISP Cisco BRAS)

 

 

My Requirement is to Dial PPPoE Connection from Customer Cisco Router.
But
because of Routed CPE(Bridging is not supported on CPE) presence i am
unable
to achieve that. 

 

Can someone suggest how is it possible?? 

 

I read somewhere that client initiated L2TP can be used for such
scenarios,
but i am not sure if it is the right solution??

 

Please help.

 

 

Regards,

 

Asad.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/