[c-nsp] Ethernet to ATM local connect

Arie Vayner (avayner) avayner at cisco.com
Wed Feb 4 04:41:30 EST 2009


Hi,

Take a look here:
http://www.cisco.com/en/US/products/hw/routers/ps368/module_installation
_and_configuration_guides_chapter09186a0080440138.html#wp1135748

Then, using ES20 for Ethernet with EVC, you have the option to
bridge-domain a QinQ VLAN to the same global SVI.

I have never tested it, and am not sure if it's a common application,
but I think this should work.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of MKS
Sent: Wednesday, February 04, 2009 00:21
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Ethernet to ATM local connect

Hi there

Is there a cisco platform / sw out there that can the following (the
critical part being _second-dot1q_)

interface gig3/1.10
 encapsulation dot1q 10 second-dot1q 2

interface atm2/0/0
 pvc 0/400 l2transport
 encapsulation aal5

connect atm-ethvlan atm2/0/0 0/400 gigabitethernet3/1.10 interworking
ethernet

http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslocal.html#wp1
096615

Regards
MKS
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list