[c-nsp] How to add new rule in the same access-list

[Alex Moya]

You can add lines if you use sequence numbers on you acl. What version  
are you using


Sent from my iPhone

On Feb 5, 2009, at 2:29 AM, Seth Mattinen <sethm at rollernet.us> wrote:

> Deric Kwok wrote:
>> Hi
>>
>> I have old rule in the switch but don't know how to add new rule in  
>> the same
>> access-list
>>
>> When I add new deny rule, it will be put at the end of the access- 
>> list
>>
>> If I remove the access-list 140, I have to re-type all lines again.
>>
>
> That's correct. You need to remove and recreate it in the correct  
> order
> lacking sequences.
>
> ~Seth
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/