[c-nsp] 6500 VTP and VLANs disappearing

Mike Louis MLouis at nwnit.com
Fri Feb 13 14:24:35 EST 2009


Hey all,

I just ran across an issue I have never seen before. We have a switch configured with about 250 VLANs and SVIs. The switch is configured in VTP transparent mode. Everything has been working fine until this morning we added a couple more vlans. After that we noticed that all but about 80 of the VLANs in the VTP database were missing. Somehow they got erased. No one was in the device since this happened and its configured in trans mode. Any ideas what could have happened? We put the VLANs back in and everything came up fine for now.

Anyone ever heard of something like this happening? Is there a max number of L3 interfaces for 6500?


Mike Louis
Senior Solutions Architect
CCIE  #17082 (R&S)
NWN, Inc
mobile:336.253.5247
mlouis at nwnit.com


________________________________
Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.


More information about the cisco-nsp mailing list