[c-nsp] 6509 Multilayer switch temperature monitor via SNMP

[Lincoln Dale]

Chris wrote:
>>> I also tried snmpwalk -o enterprises.9.9.13.1.3.1.6.1 and
>>> 1.3.6.1.4.1.9.9.13.1.3.1 and enterprises.9.9.13.1.3.1.6.1 and I get no
>>> information.
>>>
>>> Does anyone know how to get temperature information out of this box?
>>>
>>>       
>> if you're reffering to ENVMON-MIB, then try something like:
>>   snmpwalk -v2c -cpublic ltd-n7010-1 1.3.6.1.4.1.9.9.91.1.1.1.1.4
>>     
>
> Thanks. When I try that I get an error: ltd-n7010-1: Unknown Object
> Identifier (Sub-id not found: (top) -> ltd-n7010-1)
>   
LOL, replace "ltd-n7010-1" with the ip-address of your box.  (that is, 
ltd-n7010-1 refers to ltd-n7010-1.cisco.com which is obviously not 
accessable to you). :)

> If I try: snmpwalk -v2c -cpublic 1.3.6.1.4.1.9.9.91.1.1.1.1.4, I get
> an error: SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4 = No Such Object
> available on this agent at this OID
>   
is snmpv2c enablex on your box?  what did SNMP Object Navigator 
(http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en) say about 
the "supporting images"?  does the IOS you're running support it?


cheers,

lincoln.