[c-nsp] UDLD is err-disabling EoMPLS VC

[Ruben Montes (Europe)]

Hi,

We're already running 12.2(18)SXF11.

I have udld enabled for the whole box, do you mean that I must
explicitly disable udld in the interfaces on the PE switches where I
have created the VC with x-connect?

Thanks in advance,

Ruben

-----Original Message-----
From: BALLA Attila [mailto:atis at eik.bme.hu] 
Sent: jueves, 19 de febrero de 2009 17:00
To: Ruben Montes (Europe)
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] UDLD is err-disabling EoMPLS VC

I had the same issue, it must be CSCsh99351, it is fixed in
12.2(18)SXF11.
You should use udld on ce uplinks only.

BR, A.

On Thu, 19 Feb 2009, Ruben Montes (Europe) wrote:

> Hi,
>
> We have configured a new EoMPLS VC. After 3 or 5 pings, UDLD
> err-disables one of the interfaces. We are using port mode, is it
> recommended to run such a a feature in this type of connections?
>
> All the path has MPLS enabled and jumbo MTU enabled.
>
> Thanks in advance,
>
> Ruben
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>