[c-nsp] Q - Is there a way to rollback to the default Rommon Image on a SUP720?

[Munroe, James (DSS/MAS)]

Hello,

 

A recent Rommon upgrade on the SP/SP has left a SUP720-3B being unable
to read any CF Cards in Disk0 or Disk1 upon it's reboot.  Is there any
way to roll back to the default Rommon image from the rommon prompt
itself?  I know once the unit is active with IOS running it's easy to
invalid the upgradeable regions...but I've never had to attempt this
from rommon.

 

  The SUP720 loads up but complains about accessing any of the CF
slots...It was working fine beforehand.

 

Any info would be appreciated... 

 

 

Thank You,

 

 

James (Jim) Munroe

Wide Area Network - Project Lead

Corporate Information Management Services (Division)
Department of Supply and Services
4th Floor Marysville Place

P.O. Box 6000

Fredericton,  New Brunswick
E3B 5H1

 

Phone : (506) 444-6702
Cell : (506) 292-1692
Fax : (506) 444-4400
Email : james.munroe at gnb.ca
<blocked::blocked::blocked::mailto:james.munroe at gnb.ca>