[c-nsp] Determine SFP type through CLI

[Matlock, Kenneth L]

2 Ways I see to get it on the 3560 I have here (12.2(37)SE1 code)
 
"show int transceiver properties"
or
"show int status"
 
Either one gives me the SPF type I have in there.
 
Ken

________________________________

From: cisco-nsp-bounces at puck.nether.net on behalf of Jeff Wojciechowski
Sent: Fri 1/2/2009 10:36 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Determine SFP type through CLI



Hello All:

Is there an easy way to determine the model of an SFP installed on a 3560 through the CLI?

Ideally I want to match what I have installed in another 3560 that's in production. I want to add a gigabit Ethernet (copper) trunk port to another 3560 so should I be using the GLC-T, GLC-T= or something else?

Thank you,

Jeff Wojciechowski


------------------------------------------------------------------------------------------------------------------------------------------------------------
This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone
other than its intended recipient(s).  Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than
the intended recipient(s) is strictly prohibited.  If you have received this message in error, please delete the original message in its entirety (including
any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility
for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/