[c-nsp] Cisco 3G Router - IPSec configuration of central site when remote site is dynamic DHCP/3G

[Manu Chao]

Great, Thanks you all, i will try it.

What about using "crypto isakmp identity hostname" command.

Remote site can be identitifed by a hostname or FQDN instead of an IP
adress, less secure?



On Mon, Jan 5, 2009 at 5:29 PM, Seth Mattinen <sethm at rollernet.us> wrote:

> Manu Chao wrote:
>
>> Hello,
>>
>> I need central and remote Cisco IOS configuration example when using a
>> router with 3G module on a remote site.
>> IP adress of remote site is dynamic: DHCP/3G.
>>
>> How to configuration central site IPSec peer configuration when remote
>> site
>> IP @ is dynamic due to DHCP/3G?
>>
>> Central and Remote site are Cisco routers.
>>
>>
> I use DMVPN.
>
>
> http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008014bcd7.shtml
>
> ~Seth
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>