[c-nsp] Logical Router Segmentation

[Brad Hedlund]

On 1/11/09 3:40 PM, "Skeeve Stevens" <skeeve at skeeve.org> wrote:
 
> What is the easiest way to link two VRF's on two separate routers in layer 2
> - so each VRF can see the arp and so on from the other?

802.1Q Tagging.  Either using subinterfaces on routed ports, or SVI's on L2
trunking ports.

http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/
PathIsol.html#wp80090


Brad Hedlund
bhedlund at cisco.com
http://www.internetworkexpert.org