[c-nsp] Stream Association Failed: Requested codec=0x5=g711ulaw, Negotiated codec=0xFFFFFFFF=No Code

[Brian Turnbow]

A dial peer pots cannot have a codec
You need to place it the voip dial peer.
The defualt codec is g729 , you can change it by setting  a default codec clas using
voice class codec




Regards

Brian


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Aljula Hasa
Sent: mercoledì 14 gennaio 2009 12.32
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Stream Association Failed: Requested codec=0x5=g711ulaw,Negotiated codec=0xFFFFFFFF=No Code

Hi,

I am trying to run TCL IVR v2.0 script. The voice/audio is not heard. TCL
IVR application seems to run ok but don't hear voice for the reason Stream
Association Failed: Requested codec=0x5=g711ulaw, Negotiated
codec=0xFFFFFFFF=No Code.
How to set codec g711ulaw in gateway? The dial-peer is pots.
 
 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/