[c-nsp] 3560 QoS/shaping
Brad Henshaw
brad.henshaw at qcn.com.au
Wed Jan 14 23:57:32 EST 2009
Jon Lewis wrote:
> That also won't work in this special case, as the
> rate-limiting/shaping is only to be done on a class of traffic,
> and only if that traffic has to egress through a particular
> port. Under normal conditions, the traffic won't need to be
> shaped.
In that case I think you're boned. Can you kludge up a dedicated
interface
for this traffic (in this scenario) to egress?
> > You'd need a 3750ME for anything much more advanced -- and even
then,
> > this functionality is limited to two of the gig ports. I think the
> > 3400ME's support egress policies but they have their own limits and
> > retardations in this respect.
> The 6500 PFC3 can do policing on ingress/egress. Is there anything
> between the 6500 and 3550 that does?
Only the 3750ME (on ES ports) at any decent granularity that I'm aware
of
- others on the list might have more to add.
>From memory the 4948 can do rate-based shaping of its egress queues
but that would likely require messing with DSCP markings and DSCP-queue
maps.
Regards,
Brad
More information about the cisco-nsp
mailing list