[c-nsp] BGP default-originate route

Scott Ingram SIngram at clayton.com
Thu Jan 15 13:15:53 EST 2009


Thanks....  
 
Would anyone from the SP area like to add any comments?

________________________________

From: Brad Hedlund [mailto:brhedlun at cisco.com]
Sent: Wed 1/14/2009 12:49 PM
To: Scott Ingram; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] BGP default-originate route



On 1/14/09 11:19 AM, "Scott Ingram" <SIngram at clayton.com> wrote:

> I think to keep it simple
> all I want is to do "one site primary and the other standby only".

Scott,
I'm sure the SP guys will jump in at this point but that should be a fairly
straight forward setup, where the standby site's PE is configured to crank
up the metric for the default route from that location, such as padding ASN
or manipulating MED, or any other BGP setting.

Cheers,

Brad Hedlund
bhedlund at cisco.com
http://www.internetworkexpert.org <http://www.internetworkexpert.org/> 





IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.



More information about the cisco-nsp mailing list