[c-nsp] QOS VLAN

[Leslie Meade]

Hmmm I still could not get it to work.
But I got it to go on the ASA's

Thanks for the help



-----Original Message-----
From: Marek Tyban [mailto:mt at vol.cz] 
Sent: Friday, January 16, 2009 12:08 AM
To: Leslie Meade
Cc: cisco-nsp
Subject: Re: [c-nsp] QOS VLAN


Hello Leslie,

to accomplish this you need enable vlan based QoS (mls qos vlan-based).

  m.

On Thu, 15 Jan 2009, Leslie Meade wrote:

> I have a 6509e with a sup 32, and I want to control how much bandwidth 
> is available to each vlan. My uploading is working fine but I do not 
> know understand why my users on this vlan or any vlan still pulls down 
> lots of data. I have been told that I cannot do this because the 
> equipment is not suited to my needs.
>
> This is what I have
>
> policy-map 4_Mb_Internet
>  class class-default
>   police cir 4194000 bc 491515 be 491515 conform-action transmit exceed-action drop violate-action drop
>
> interface Vlan4
> description 2012 Camera Feed
> ip address 10.1.4.2 255.255.255.0
> ip access-group Productions in
> ip helper-address 10.1.6.10
> no ip redirects
> no ip unreachables
> ip flow ingress
> ip route-cache flow
> no ip mroute-cache
> mls netflow sampling
> standby 15 ip 10.1.4.1
> standby 15 priority 250
> standby 15 preempt
> service-policy input 4_Mb_Internet
> service-policy output 4_Mb_Internet
>
>
> Any one point me in the right direction
>
> Leslie
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/