[c-nsp] Not Allowing Vlan 1 on trunk ports

[Allan Eising]

You could always use:

switchport trunk allowed vlan 2-4094, or specify exactly the vlans you want
passing over the trunk, eg.

interface GigabitEthernet0/14
  switchport trunk encapsulation dot1q
  switchport mode trunk
  switchport trunk allowed vlan 2,10,200-300
!

Allan

On Sun, Jan 18, 2009 at 8:16 AM, Hitesh Vinzoda <vinzoda.hitesh at gmail.com>wrote:

> Dear All
>
> Is there a way to supress vlan 1 from passing from a trunk link coz i m not
> able to shutdown the L2 vlan 1.
>
>
> Regards
>
> Ronnie
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>