[c-nsp] Weird disk0: issues

[Graham Wooden]

Ah .. interesting. I didn't know that you can jump to the SP from the  
RP like that. The new thing I learned today!

Well, I hope this works with the Sup2 since sounds like I have to get  
the ATA flash reformmated in the SP ...

Again,  Thanks for the tidbit!

-graham

> On Thu, 2009-01-22 at 21:50 -0600, Graham Wooden wrote:
>> Format in the SP?  It's not running the CatOS (Hybrid), so I am not
>> operating out of that space anymore - all I have is the RP to run commands
>> like that...
>>
>> Am I missing something here Toby?
>
> I can't comment if it will do the trick/solve your original problem, but
> you can "format from the SP" via a remote login from RP to SP (on the
> running system):
>
> Switch#format ?
>   bootflash:      Filesystem to be formatted
>   disk0:          Filesystem to be formatted
>   disk1:          Filesystem to be formatted
>   scp:            Filesystem to be formatted
>   sup-bootflash:  Filesystem to be formatted
>
> Switch#remote ?
>   command  Remote command execution
>   login    Remote console login
>
> Switch#remote login ?
>   module      Remote console login module
>   standby-rp  Remote login standby-rp
>   switch      Remote console login switch
>
> Switch#remote login switch
> Trying Switch ...
> Entering CONSOLE for Switch
> Type "^C^C^C" to end this session
>
>
> Switch-sp#format ?
>   bootflash:      Filesystem to be formatted
>   disk0:          Filesystem to be formatted
>   disk1:          Filesystem to be formatted
>   sup-bootflash:  Filesystem to be formatted
>
> Switch-sp#exit
>
> [Connection to Switch closed by foreign host]
> Switch#
>
> This is a Sup720 (don't have any Sup2 to test with) so you might not
> have this option.
>
> Regards,
> Peter
>
>
>