[c-nsp] %VRF: does not exist

[jcovini at free.fr]

Hi,

Im trying to setup IP SLA IpIcmpEcho monitor inside a VRF, onto a C3560 running
12.2(35)SE5.

However, Im facing an error msg stating my vrf doesn't exist :

Switch#show ip vrf Internet
  Name                             Default RD          Interfaces
  Internet                         1:1                 Gi0/28
                                                       Vl335
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#rtr 2
Switch(config-rtr-echo)#vrf Internet ?
LINE    <cr>

Switch(config-rtr-echo)#vrf Internet
%VRF: Internet  does not exist
Switch(config-rtr-echo)#

any clue ?!

Jerome Covini