[c-nsp] charge on alert

Juli Juli juli.julialb at gmail.com
Wed Jan 28 05:29:43 EST 2009

I solved the problem. Inkstand of R2 interface , i used PRI interface.

On Fri, Jan 23, 2009 at 1:14 PM, Juli Juli <juli.julialb at gmail.com> wrote:

> Hello,
> Could somebody help me on issue below?
> Call comes into an E1 R2 line on a Cisco  AS5400 and gets sent via  H323 to
> an endpoint.  The endpoint  send alerting messages and  the Cisco AS5400
> send to TX ANSWERED on CAS leg .
> I am charging this call on alerting. How can i prevent this?
> The cut-through :both direction is activated by voice rtp send-recv.
> Also i tried to deactivate early cut-through by command below.
> sip-ua
>   disable-early-media 180
> I tried also  to play with progress_ind on VOIP Dial-peer but it same
> situation.
> I charge this call on  alert phase.
> Juli

More information about the cisco-nsp mailing list