[c-nsp] CPU comparison - bridge vs. route on 7206?

[Rodney Dunn]

I couldn't remember so I looked for a picture and thought I saw one it did
have.

They would need the G1/G2 then.

Or maybe go to routed mode.

Rodney


On Wed, Jul 01, 2009 at 10:53:28AM -0700, Jay Hennigan wrote:
> Rodney Dunn wrote:
> >The PA-GE has issues at higher speeds.
> >
> >You should move to L2TPV3 and see if it's better in regards
> >to performance. Your best would be pure L3 forwarding.
> >
> >If the PA-GE is the issue you will have to get off that PA.
> >
> >What happens if you move it to one of the onboard GigE ports on the 
> >NPE-400?
> 
> There aren't any onboard gigE ports on an NPE-400.  You need NPE-G1 for 
> those.
> 
> --
> Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
> Impulse Internet Service  -  http://www.impulse.net/
> Your local telephone and internet company - 805 884-6323 - WB6RDV
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/