[c-nsp] Cisco PfR PIRO problems...

[Darren Yang]

Hi all,

I using Cisco 1812 and firmware version is
"c181x-adventerprisek9-mz.124-24.T.bin".
My problem is PfR that didn't use OSPF as parent route, it only accept
Static route as parent.

My PfR configuration is list below...
-----------------
oer master
 logging
 !
 border 192.168.1.2 key-chain GREEN

  interface Vlan2 internal
  interface Tunnel114 external
  interface Tunnel14 external
  interface Tunnel113 external
  interface Tunnel13 external
  interface Tunnel111 external
  interface Tunnel11 external
 !
 learn
  throughput
  delay
  periodic-interval 0
  monitor-period 1
  traffic-class filter access-list pfr-filter
  expire after time 5
  aggregation-type prefix-length 32
 backoff 90 3000
 mode route control
 mode monitor passive
 mode select-exit best
 periodic 180
 !
!
oer border
 logging
 local Vlan254
 master 192.168.1.2 key-chain GREEN
-----------------


Another I see debug information....
-------------
*Jul  3 07:34:45.291: %OER_BR-5-NOTICE: Prefix Learning STOPPED
*Jul  3 07:34:45.491: %OER_MC-5-NOTICE: Prefix Learning WRITING DATA
*Jul  3 07:34:45.555: %OER_MC-5-NOTICE: Prefix Learning STARTED
*Jul  3 07:34:45.555: %OER_BR-5-NOTICE: Prefix Learning STARTED
*Jul  3 07:34:29.367: PFR PIRO: Control Route, 10.11.1.16/32, NH
0.0.0.0, IF Tunnel11
*Jul  3 07:34:29.371: PFR PIRO: Control Route, 10.11.1.16/32, NH
0.0.0.0, IF Tunnel111
*Jul  3 07:34:29.371: %OER_MC-5-NOTICE: Uncontrol Prefix
10.11.1.16/32, Couldn't control
-------------

I don't know why PfR can't control that prefix...



Appreciate your kind advise. Thanks.

pigsign