[c-nsp] sh ip interface brief

[masood at nexlinx.net.pk]

r u running NAT on ths box, if yes; NVI, usually used for NATing out of VFRs.

Regards,
Masood
Blog: http://weblogs.com.pk/jahil/


> Hello,
>
> I have never seen interface named NVI0. What is this NVI0?
>
> router#sh ip interface brief
> Interface                  IP-Address      OK? Method
> Status                Protocol
> GigabitEthernet0/0         x.x.x.x   YES NVRAM  up                    up
> GigabitEthernet0/0.1       x.x.x.x    YES NVRAM  up                    up
> GigabitEthernet0/0.2       x.x.x.x    YES NVRAM  up                    up
> GigabitEthernet0/1         x.x.x.x  YES NVRAM  up                    up
> FastEthernet0/0/0          unassigned      YES unset
> up                    down
> FastEthernet0/0/1          unassigned      YES unset
> up                    down
> FastEthernet0/0/2          unassigned      YES unset
> up                    down
> FastEthernet0/0/3          unassigned      YES unset
> up                    down
> Vlan1                            unassigned      YES NVRAM
> up                    down
> *NVI0                            unassigned      NO  unset
> up                    up*
> Virtual-Access1            unassigned      YES unset
> down                  down
>
> Sincerely,
> Tseveen.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>