[c-nsp] PIM-SM - Configuring join/prune message interval

Tassos Chatzithomaoglou achatz at forthnet.gr
Fri Jul 3 13:01:00 EDT 2009


You don't need this command. Check CSCej32303.

Tassos

Nicola's Leiva wrote on 03/07/2009 18:24:
> Hi,
> 
> How can I configure the periodic PIM’s join/prune message interval on IOS
> 12.2 or later?. ip pim message-interval would do the trick on 12.1, but it
> does not seem to be supported on 12.2 nor found info on DocCD for later
> releases. Is it that changing the 60 seconds default make no much sense?.
> What am I missing?
> 
> Please advice,
> 
> Nicola's
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 



More information about the cisco-nsp mailing list