[c-nsp] backup cpe

[Arie Vayner (avayner)]

Mohammad,

Take a look here:

Enhanced Object Tracking
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/fthsrptk
.html

Reliable Static Routing Backup Using Object Tracking
http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbac
kupx.html

Embedded Event Manager (EEM)
http://www.cisco.com/en/US/products/ps6815/products_ios_protocol_group_h
ome.html


I think this should give you some ideas...

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mohammad Khalil
Sent: Sunday, July 12, 2009 11:28
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] backup cpe


hi all 
i have a router with 2 ethernet interfaces
one is connected to a microwave device (Leased Line) and the other is
connected to a WiMAX CPE
now if the leased line went down 
how im going to activate the cpe automatically ??
there is no dialing in the CPE it obtain a DHCP ip address from the BS
once the LOS is there 

Thanks 

_________________________________________________________________
More than messages-check out the rest of the Windows Live(tm).
http://www.microsoft.com/windows/windowslive/
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/