[c-nsp] SA-VAM & NPE-200

[Ge Moua]

I've done this before; this will work but Cisco will not give you 
support if there are issues;also the VAM combo with this router engine 
results in very llittle throughput; not worth it IMHO.

Regards,
Ge Moua | Email: moua0100 at umn.edu

Network Design Engineer
University of Minnesota | Networking & Telecommunications Services




Kris Amy wrote:
> Hi,
>
> Just wondering if this combination works. The documentation says a NPE225 is required however i'm wondering if that is just a warning or an actual requirement...
>
> --
> Kind Regards,
> Kris Amy
> Enterprise IP
> Phone:     07 3123 5510
> National: 1300 347 287
> Fax:         1300 347 329
> Direct:     07 3123 5511
> Email:      kris.amy at eip.net.au<outbind://2-00000000FC347F44727AD040BF1A93E9A3DC68310700065EB17B7262634485BBBA18AFE92E3E0007A2A2A7EE0000065EB17B7262634485BBBA18AFE92E3E0007D22B10350000/kris.amy@eip.net.au>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>