[c-nsp] MST config on single 3560

[mb at adv.gcomm.com.au]

Quoting Manu Chao <linux.yahoo at gmail.com>:

> the standard is ieee 802.1s
>
> don't change anything to your interface config
> mst instance and vlan association is a global config
>
> if you planned to migrate to mst on your side, make sure you will migrate to
> mst with your client ;)
>

Thanks for the reply.

As we have single 3560's that do not participate in VTP (vtp mode 
transparent), would I be able to have a config similar to this(On each 
3560 in each POP):

spanning-tree mode mst
spanning-tree mst configuration
name LOC_A
revision 10
instance 0 : Vlan 1-4094
spanning-tree mst 0 root primary

And maintain the existing port configs?

If we are getting close to reaching port capacity on each 3560, we will 
be upgrading to 4500's.




-------------------------------------------------------------------------
This e-mail was sent via GCOMM WebMail http://www.gcomm.com.au/