[c-nsp] MLPPP throughput

Dave Weis djweis at internetsolver.com
Thu Jul 16 08:56:41 EDT 2009


Manu Chao wrote:
> can you please display same reorder stats on customer side?

Other than this one?

>>>>
>>>> The multilink bundle shows a lot of discards and reorders. This is
>> after a
>>>> reset and downloading less than a gig of data on the client:
>>>>
>>>> Virtual-Access3, bundle name is isprouter
>>>>   Endpoint discriminator is isprouter
>>>>   Bundle up for 01:15:43, total bandwidth 400000, load 1/255
>>>>   Receive buffer limit 48768 bytes, frag timeout 1000 ms
>>>>   Using relaxed lost fragment detection algorithm.
>>>>   Dialer interface is Dialer0
>>>>     0/0 fragments/bytes in reassembly list
>>>>     242 lost fragments, 1237543 reordered
>>>>     29169/15194784 discarded fragments/bytes, 16700 lost received
>>>>     0x1F9178 received sequence, 0x6A517 sent sequence
>>>>   Member links: 4 (max not set, min not set)
>>>>     Vi4, since 01:15:43, unsequenced
>>>>     PPPoATM link, ATM PVC 0/32 on ATM0/0
>>>>     Packets in ATM PVC Holdq: 0, Particles in ATM PVC Tx Ring: 0
>>>>     Vi6, since 01:15:43, unsequenced
>>>>     PPPoATM link, ATM PVC 0/32 on ATM1/0
>>>>     Packets in ATM PVC Holdq: 0, Particles in ATM PVC Tx Ring: 0
>>>>     Vi5, since 01:15:43, unsequenced
>>>>     PPPoATM link, ATM PVC 0/32 on ATM0/2
>>>>     Packets in ATM PVC Holdq: 0, Particles in ATM PVC Tx Ring: 0
>>>>     Vi2, since 01:15:43, unsequenced
>>>>     PPPoATM link, ATM PVC 0/32 on ATM0/1
>>>>     Packets in ATM PVC Holdq: 0, Particles in ATM PVC Tx Ring: 0
>>>> No inactive multilink interfaces




-- 
Dave Weis
515-224-9229
djweis at internetsolver.com
http://www.internetsolver.com/


More information about the cisco-nsp mailing list