[c-nsp] TCLsh + Ping TOS

[.....::::[Gardener] ::::.....]

thank you very much guys,

I will try to create this script and will give you.

See ya


----------------------
NO STREES
ECO ATTITUD :D


On Tue, Jul 21, 2009 at 7:39 AM, Ivan Pepelnjak <ip at ioshints.info> wrote:

> Tcl doesn't have "expect" but it does have "typeahead" which you can
> probably use to feed the input to Ping command.
>
> http://wiki.nil.com/Insert_responses_to_command_prompts_in_Tclsh
> http://wiki.nil.com/Tclsh_on_Cisco_IOS_tutorial
>
> Ivan
>
> http://www.ioshints.info/about
> http://blog.ioshints.info/
>
> > -----Original Message-----
> > From: Ziv Leyes [mailto:zivl at gilat.net]
> > Sent: Tuesday, July 21, 2009 8:51 AM
> > To: .....::::[Gardener] ::::.....; cisco-nsp at puck.nether.net
> > Subject: Re: [c-nsp] TCLsh + Ping TOS
> >
> > That's interesting indeed, the one line ping command seems to
> > not be able to include the extended commands, so I wonder,
> > does the tcsh support "expect"
> > Because that could be a solution for this kind of need.
> >
> > Regarding the command running from other place you could use
> > an alias exec, e.g.
> > alias exec multiping tclsh disk2:file.tcl
> >
> > Hope this helps
> > Ziv
> >
> >
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net
> > [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> > .....::::[Gardener] ::::.....
> > Sent: Monday, July 20, 2009 7:59 PM
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] TCLsh + Ping TOS
> >
> > Hi to everyone.
> >
> > Please i need some advice to create a little script to make
> > Ping with TOS
> >
> > i found on several webpages, things like this.
> >
> > R1#tclsh
> > R1(tcl)#foreach address {
> > +>(tcl)#172.12.23.2
> > +>(tcl)#172.12.23.3
> > +>(tcl)#172.12.23.4
> > +>(tcl)#172.12.23.6
> > +>(tcl)#172.12.23.7
> > +>(tcl)#} { ping $address re 10 si 1500
> > +>(tcl)#}
> >
> > This is my problem, i can not make the complete command on
> > ONE line (becouse i don't have TOS ).
> >  I need to create script to execute things like this.
> >
> > R1#ping
> > Protocol [ip]:
> > Target IP address: 172.16.123.1
> > Repeat count [5]: 1000
> > Datagram size [100]:
> > Timeout in seconds [2]:
> > Extended commands [n]: y
> > Source address or interface: loopback0
> > Type of service [0]: 96
> > Set DF bit in IP header? [no]:
> > Validate reply data? [no]:
> > Data pattern [0xABCD]:
> > Loose, Strict, Record, Timestamp, Verbose[none]:
> > Sweep range of sizes [n]:
> >
> >
> >
> > The other impossibility that i have i can not create or bring
> > from other place the file.tcl, all this script has to be
> > applied on-line on the router.
> >
> > Thank you.
> >  Andres P. Spano
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
> >
> > **************************************************************
> > **********************
> > This footnote confirms that this email message has been
> > scanned by PineApp Mail-SeCure for the presence of malicious
> > code, vandals & computer viruses.
> > **************************************************************
> > **********************
> >
> >
> >
> >
> >
> >
> > **************************************************************
> > **********************
> > This footnote confirms that this email message has been
> > scanned by PineApp Mail-SeCure for the presence of malicious
> > code, vandals & computer viruses.
> > **************************************************************
> > **********************
> >
> >
> >
> >
> >
>
>