[c-nsp] even Eompls "vc" is up but can not work
ying-xiang
ying-xiang at 163.com
Mon Jun 1 10:29:46 EDT 2009
hi
the vc still is up,but the eompls does't work suddenly.
i got the show message on the cli
Local interface: VFI SDH-NEC VFI up
MPLS VC type is VFI, interworking type is Ethernet
Destination address: 192.168.4.16, VC ID: 807, VC status: up
Output interface: Te2/0/0, imposed label stack {185 188}
Preferred path: not configured
Default path: active
Next hop: 192.168.128.14
Create time: 19w4d, last status change time: 17:31:07
Signaling protocol: LDP, peer 192.168.4.16:0 up
Targeted Hello: 192.168.0.1(LDP Id) -> 192.168.4.16
MPLS VC labels: local 336, remote 188
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 4016946, send 9576394
byte totals: receive 427480129, send 2838427498
packet drops: receive 0, send 0
sh mpls l2transport vc
VFI SDH-NEC VFI 192.168.4.16 807 UP
seems it does not have any issue here, except tunnel lable can not be found .what should i do for the further troubleshooting?
More information about the cisco-nsp
mailing list