[c-nsp] IO 7200 GE Improve Performance and help with the CPU Load?

masood at nexlinx.net.pk masood at nexlinx.net.pk
Wed Jun 3 12:24:15 EDT 2009


cisco 7200 is a software based router so that every packet is punted to
the NPE. You need to replace your NPE instead of PIC. which cisco 7200
series network processing engine you are running? what you get when do
"show version" on this router? By using 'show processes cpu sorted 1min'
you can check which process is eating NPE cpu cycles.

Regards,
Masood


> It have
>
> int fa0/0
>   30 second input rate 30616000 bits/sec, 13300 packets/sec
>   30 second output rate 47680000 bits/sec, 12178 packets/sec
>
> int fa 0/1
>   30 second input rate 27478000 bits/sec, 4672 packets/sec
>   30 second output rate 19071000 bits/sec, 3774 packets/sec
>
> int ser4/0 (ds3 link)
>  30 second input rate 43264000 bits/sec, 11862 packets/sec
>  30 second output rate 28832000 bits/sec, 13590 packets/sec
>
> 59376 Total
>
> Thanks
>
> David Granzer escribió:
>> Hi,
>>
>> could you post how much bandwidth and packet per second your 7200 ?
>> Generally upgrade to I/O GE will not
>> help much because the performance is based on the NPE used.
>>
>> regards,
>> David
>>
>>
>> On Wed, Jun 3, 2009 at 3:52 PM, Juan C. Crespo R. <jcposeidon at cantv.net>
>> wrote:
>>
>>> Guys
>>>
>>>   I have one POP with 90% of CPU Load (WCCP2,  QoS and other minor
>>> stuff)
>>> and we are thinking about change the IO/7200-2FE by one IO/7200-GE
>>> could
>>> this help with this load?
>>>
>>> Thanks
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>>>
>>
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>




More information about the cisco-nsp mailing list