[c-nsp] MPLS/IP-VPN capable cards on Cat 6500

[Arie Vayner (avayner)]

Marlon,

If you have DFCs on the regular LAN cards, then EoMPLS and L3VPN will be
done in hardware and in distributed forwarding mode.
For VPLS, you need to have either an ES20/ES40 card or a SIP card facing
the core. Having this card means that again VPLS is done in hardware -
some functionality is done on the regular DFCs and some on the egress
core facing module.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Marlon Duksa
Sent: Thursday, June 04, 2009 02:07
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] MPLS/IP-VPN capable cards on Cat 6500

Hi -Does anyone know which cards on Cat6500 support MPLS
and separately IP-VPN, posibly at 40Gbps throughput? I'm looking for a
distributed (DFC) forwarding solution?

I know that Cat6500 is very limited in VPLS support, but IP-VPN and
EoMPLS
should be no problem, right?

Thanks,
Marlon
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/