[c-nsp] Inter-AS EoMPLS/VPLS

[Lars Lystrup Christensen]

Hi Tassos,

You could do inter-AS EoMPLS by using Pseudo Wire stitching/switching, which is supporte don 12.2(33)SRC on the 7600.

It's done as a kind of VPLS domain, however it can only handle one neighbour.

______________________________________

Med venlig hilsen / Kind regards

Lars Lystrup Christensen 
Director of Engineering, CCIE(tm) #20292

Danske Telecom A/S
Sundkrogsgade 13, 4 
2100 København Ø 


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tassos Chatzithomaoglou
Sent: 10. juni 2009 10:10
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Inter-AS EoMPLS/VPLS

Does anyone have any experience?

I can see it's supported only on IOS-XR, so 7600 it's out of the question (any plans?).
http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.7/mpls/configuration/guide/gc37v2.html#wp1100339

-- 
Tassos
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/