[c-nsp] need help.....

[jcovini at free.fr]

C2950(config)#vlan 0
Command rejected: Bad VLAN list - character #2 (EOL) delimits a VLAN
number (0) out of the range 1..4094.

But go and check the following doc, you will see that VLAN 0 can be used by a
Cisco switch to forward DOT1P-tagged voices frames :

http://www.cisco.com/en/US/docs/switches/lan/catalyst2970/software/release/12.1_19_ea1/configuration/guide/swvoip.html#wp1034347


Selon Arup Bhattacharya <arup.ab at gmail.com>:

> Why VLAN 0 is not configur in Switch where as starting range of VLAN is 0
> and default VLAN is 1.......
>
> --
> Regards.....
> Arup Bhattacharya
> GSM-9748238797
> -------------------------------------
> Success is not final, failure is not fatal: it is the courage to continue
> that counts
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>