[c-nsp] x6148 vs. x6548

[Jared Mauch]

On Jun 12, 2009, at 9:51 AM, Bill Blackford wrote:

> Your question is one of mine as well. I plan to from EC's across the  
> 6548 and a 6516-GBIC (yes copper and fiber).
>
> So does this essentially mean that every 6 ports has its own gig  
> ASIC? So, I'd have to stagger like: 1/1, 1/7, 1/13, etc.?

You can see the port ASIC mapping with the following command: (note  
the 1-12 or 1-8 grouping)

Router#show interfaces f3/1 capabilities
FastEthernet3/1
   Dot1x:                 yes
   Model:                 WS-X6348-RJ-45
   Type:                  10/100BaseTX
   Speed:                 10,100,auto
   Duplex:                half,full
   Trunk encap. type:     802.1Q,ISL
   Trunk mode:            on,off,desirable,nonegotiate
   Channel:               yes
   Broadcast suppression: percentage(0-100)
   Flowcontrol:           rx-(off,on),tx-(none)
   Membership:            static
   Fast Start:            yes
   QOS scheduling:        rx-(1q4t), tx-(2q2t)
   CoS rewrite:           yes
   ToS rewrite:           yes
   Inline power:          no
   SPAN:                  source/destination
   UDLD                   yes
   Link Debounce:         yes
   Link Debounce Time:    no
   Ports on ASIC:         1-12
   Port-Security:         yes

Router#sh int g1/1 cap
GigabitEthernet1/1
   Model:                 WS-X6416-GBIC
   Type:                  1000BaseSX
   Speed:                 1000
   Duplex:                full
   Trunk encap. type:     802.1Q,ISL
   Trunk mode:            on,off,desirable,nonegotiate
   Channel:               yes
   Broadcast suppression: percentage(0-100)
   Flowcontrol:           rx-(off,on,desired),tx-(off,on,desired)
   Membership:            static
   Fast Start:            yes
   QOS scheduling:        rx-(1p1q4t), tx-(1p2q2t)
   QOS queueing mode:     rx-(cos), tx-(cos)
   CoS rewrite:           yes
   ToS rewrite:           yes
   Inline power:          no
   SPAN:                  source/destination
   UDLD                   yes
   Link Debounce:         yes
   Link Debounce Time:    yes
   Ports on ASIC:         1-8
   Remote switch uplink:  yes
   Dot1x:                 yes
   Port-Security:         yes