[c-nsp] Two events in EEM

[Rodney Dunn]

In your first applet that triggers on the syslog pattern have it
actually configure the second EEM applet that then runs on a
countdown timer:

action 4.0 cli command "event timer countodwn 30

Basically, have one applet configure the second and have the
second configure a third that would remove the second after it
runs the commands.

Depending on if you only want it to run once, which a countdown timer
does.

Rodney





On Sun, Jun 14, 2009 at 11:57:23PM -0500, Rishi Kochar wrote:
> hi
> i work for cisco in UC technology.
> i am very new to EEM. I dont deal with scripting at all but i have to create
> one for one of my customers
> 
> I have created an event manager applet with an '
> #event syslog pattern <pattern>.
> Now after matching the pattern i want it wait for a countdown timer and the
> execute certain cli commands.
> what's the easiest way to do it ?
> i think with EEM i cant make my first applet to call another applet which
> has a countdown timer because with
> #action 1.0 cli command "event manager run <2nd applet>"
> in this 2nd applet should have "event none" if i need to call it manually
> from 1st applet but thats not the case because 2nd applet will have a
> countdown timer as its event.
> 
> any help on this would be highly appreciated
> 
> thanks and regards
> inder
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/