[c-nsp] Can you apply crypto map to SVI

[Andy Saykao]

Hi All,
 
Got a problem with a site-to-site IPSEC vpn implementation where one end
is using SVI.
 
Does any body know if a crypto map can be applied to a SVI to bring up
the IPSEC tunnel? It accepts the command but I can't pass any traffic
to/from it.
 
interface vlan 10
 crypto map MY-MAP
 
Or do you need to apply the crypto map to a physical interface? 
 
I've gotten it working on a sub-interface (eg: interface
GigabitEthernet0/0.11) but can't find any documentation that talks about
applying it to a SVI and whether this will work.
 
Thanks.
 
Andy

This email and any files transmitted with it are confidential and intended
 solely for the use of the individual or entity to whom they are addressed. 
Please notify the sender immediately by email if you have received this 
email by mistake and delete this email from your system. Please note that
 any views or opinions presented in this email are solely those of the
 author and do not necessarily represent those of the organisation. 
Finally, the recipient should check this email and any attachments for 
the presence of viruses. The organisation accepts no liability for any 
damage caused by any virus transmitted by this email.