[c-nsp] ME-4924-10GE & mgt port

[victor]

Like I said there is nothing like "interface FastEthernet1" in the  
running-config
Maybe I need to enable it somewhere?
When I plug in a patch-cord the link ON THE OTHER SIDE goes up but the  
light beneath mgt port doesn't light up.
BTW, sho int doesn't list Fe1 as a possible option.

On Wed, 17 Jun 2009 10:31:31 +0400, Arie Vayner (avayner)  
<avayner at cisco.com> wrote:

> Victor,
>
> Try taking a look here:
> http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/52sg/conf
> iguration/guide/sw_int.html#wp1110617
>
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of victor
> Sent: Wednesday, June 17, 2009 08:50
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] ME-4924-10GE & mgt port
>
> Hi
> Please, help. What is the purpose of mgt port on ME-4924-10GE. I somehow
>
> feel that it's for out-of-band management but there is no corresponding
>
> entry in the config. Though during the boot it prints "1 Virtual
> Ethernet
> Interface". Current IOS - ipbase-m 12.2(31) sga5.
> How can I use this port?


-- 
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/