[c-nsp] NAT issue

[Rodney Dunn]

What does your routing look like to get it in/out the same ATM interface?

On Wed, Jun 17, 2009 at 04:55:04PM -0300, c0re dumped wrote:
> Hello guys,
> 
> I have following scenario:
> 
> I receive a packet in ATM0/0 interface. The packet has the following
> addresses: SRC A.A.A.A and DST B.B.B.B.
> I must translate the packet and send it out the *same* interface
> (ATM0/0), *but* with the following addresses: SRC X.X.X.X DST Y.Y.Y.Y
> 
> What NAT configuration do I have to apply so that will work perfectly ?
> 
> 
> thanx,
> 
> Fabio
> 
> -- 
> 
> "To err is human, to blame it on somebody else shows management potential."
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/