[c-nsp] Sup720 vs RSP720 - Difference?
Ian.Mackinnon at lumison.net
Fri Jun 19 10:58:40 EDT 2009
The biggie is 7600 only not 6500 :-(
As I am sure Gert will be along shortly to say.
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Rick Ernst
> Sent: 19 June 2009 15:55
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Sup720 vs RSP720 - Difference?
> I'm not seeing anything jump out at me as different between the
> Sup720(3BXL) and RSP. What am I missing?
> The potential deployment is core "glue" (router-reflector, redundancy)
> between border and aggregation layers. Other than BGP and OSPF, it's
> would be essentially to just move packets. uRPF and BGP blackholing
> be at the border, but I'd like to pull NetFlow data from the core.
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> archive at http://puck.nether.net/pipermail/cisco-nsp/
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison accept no liability for any
damage caused by any virus transmitted by this email.
More information about the cisco-nsp