[c-nsp] Reload without confirmation

Ivan Pepelnjak ip at ioshints.info
Wed Jun 24 08:56:17 EDT 2009


I wanted to propose the EEM solution :)

How about Tclsh with "typeahead" command?

http://wiki.nil.com/Insert_responses_to_command_prompts_in_Tclsh

Ivan
 
http://www.ioshints.info/about
http://blog.ioshints.info/ 

> -----Original Message-----
> From: David Freedman [mailto:david.freedman at uk.clara.net] 
> Sent: Wednesday, June 24, 2009 2:26 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Reload without confirmation
> 
> Am trying to reload a low end IOS device (c800 in this case) 
> without displaying a confirmation prompt.
> 
> My issue is that the platform needing to issue the command 
> can not "see"
> the VTY output so could not be expected to respond to a 
> confirmation prompt, looked in vain for some kind of 
> "/noconfirm" flag but didn't find one...
> 
> Does not appear to be possible with SNMP (even though it 
> accepts the snmp-server shutdown command).
> 
> My current solution is to use an EEM applet called manually 
> with a single action of "reload" , unfortunately this only 
> applies to 800 images with EEM (I would guess ADV images only)
> 
> Anybody come up with a better solution?
> 
> TIA
> 
> Dave.
> 
> 
> 



More information about the cisco-nsp mailing list