[c-nsp] Reload without confirmation

Jared Mauch jared at puck.nether.net
Wed Jun 24 09:07:48 EDT 2009


You can't use reload at to meet your needs?

Jared Mauch

On Jun 24, 2009, at 8:25 AM, David Freedman  
<david.freedman at uk.clara.net> wrote:

> Am trying to reload a low end IOS device (c800 in this case) without
> displaying a confirmation prompt.
>
> My issue is that the platform needing to issue the command can not  
> "see"
> the VTY output so could not be expected to respond to a confirmation
> prompt, looked in vain for some kind of "/noconfirm" flag but didn't
> find one...
>
> Does not appear to be possible with SNMP (even though it accepts the
> snmp-server shutdown command).
>
> My current solution is to use an EEM applet called manually with a
> single action of "reload" , unfortunately this only applies to 800
> images with EEM (I would guess ADV images only)
>
> Anybody come up with a better solution?
>
> TIA
>
> Dave.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list