[c-nsp] Load sharing

[Rodney Dunn]

On Wed, Jun 24, 2009 at 11:32:46AM +0300, Mohammad Khalil wrote:
> 
> I have router 1841
> and i connected leased line 4M
> from the LAN side i connected 3COm switch
> then ASA and another router comes 
> there is a server connected to another firewall connected to the 3COM switch
> now the case i want to divide the 4M between the ASA and the other router
> and i want at the same time the server to have upload priority only for example 3M

Define a QOS policy and apply it to the 4M line.

You can allocate BW to each class and "police" it too if you want to cap it.

Rodney

> 
> 
> _________________________________________________________________
> More than messages?check out the rest of the Windows Live?.
> http://www.microsoft.com/windows/windowslive/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/