[c-nsp] Export routes from VRF to the global routing table

[schilling]

If you have loopback cable on the same router, or vlan between two different
routers, you could potentially run a IGP routing protocol for example ospf
on the same network while using different context/process on each end to
exchange routes.


Schilling








On Mon, Mar 2, 2009 at 8:08 PM, Leonardo Gama Souza <
leonardo.souza at nec.com.br> wrote:

> Hi list,
>
> I am almost confident this is not possible, but would like to confirm
> whether exporting routes from some VRF to the global routing table is
> possible or not.
> This would be a solution to overcome the constraints of using PBR+GRE
> setup.
>
> Thanks in advance.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>