[c-nsp] TE FRR via CSC
Oliver Boehmer (oboehmer)
oboehmer at cisco.com
Tue Mar 3 10:53:34 EST 2009
Dmitry V. Volkov <> wrote on Tuesday, March 03, 2009 08:08:
> Hi All,
>
> Does anyone have experience organizing TE FRR via CSC? Customer
> network is VOIP operator and they would like organize fast
> convergence via CSC connection.
Don't see how this can be done at the moment. You can investigate
Inter-AS MPLS-TE (and moving to PCE in the future), but this generally
requires an Inter-AS setup, rather than CSC.
General note: TE-FRR is generally not required for Voice, fast
convergence (sub-second) is generally sufficient..
Your challenge could be L3VPN convergence (CSC is using regular L3VPN
mechanisms within the carrier's AS), so your convergence will depend on
what the customer is providing. A L2VPN setup (where you could run
BFD-triggered FRR over the L2VPN circuit) might be better if you strive
for reliable sub-500msec convergence or so..
oli
More information about the cisco-nsp
mailing list