[c-nsp] VPLS on 7600
Mateusz Blaszczyk
blahu77 at gmail.com
Wed Mar 4 05:00:06 EST 2009
2009/3/4 Asheesh Jadav <ajadav at gmail.com>:
> The Line card I have is a WS-X6408A-GBIC. I'm using different ports on the
> same line card for my attachment circuit as well as VC. Is VPLS supported on
> this hardware?
VPLS is supported only on ES, SPA and OSM line cards
[...]
>> interface Tunnel1
>> ip unnumbered Loopback0
>> mpls traffic-eng tunnels
>> mpls ip
>> tunnel source GigabitEthernet4/1
I think you need to source the tunnel from Lo0
>> tunnel destination 7.7.7.7
>> tunnel mode mpls traffic-eng
>> tunnel mpls traffic-eng autoroute announce
>> tunnel mpls traffic-eng path-option 1 dynamic
[...]
>> interface Vlan100
>> no ip address
>> xconnect vfi vpls
This configuration is not supported on your line card.
Best Regards,
-mat
--
pgp-key 0x1C655CAB
More information about the cisco-nsp
mailing list