[c-nsp] (no subject)
Leslie Meade
lmeade at signal.ca
Wed Mar 4 13:21:39 EST 2009
I am trying to bridge my 2821 to one ip to give me redundancy.
I am using this config to bridge the two ints and I see gig0/1 up and the bvi up but I am not able to ping it
The original config gig0/1 had the ip of 10.1.1.6 and I could ping everything and get to everything
Ios C2800NM-IPVOICEK9-M
Any ideas ?
bridge irb
!
interface gig0/0.100
encapsulation dot1Q 100
bridge-group 100
!
interface gig0/1.100
encapsulation dot1Q 100
bridge-group 100
!
interface BVI100
ip address 10.1.1.6 255.255.255.0
no shutdown
!
bridge 100 protocol ieee
bridge 100 route ip
More information about the cisco-nsp
mailing list