[c-nsp] Issue with 16MB flash card in ls1010

[Brian Spade]

Hey all,

I'm trying to install a 16mb flash card into an LS1010 running 12.0(10).
The LS1010 recognizes the card from a 'sh ver' but pauses and spits out a
traceback when viewing:

Cisco Internetwork Operating System Software
IOS (tm) LS1010 WA4-5 Software (LS1010-WP-M), Version 12.0(10), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 22-Mar-00 08:39 by phanguye
Image text-base: 0x60010930, data-base: 0x60696000

ROM: System Bootstrap, Version 11.2(1.4.WA3.0) [integ 1.4.WA3.0], RELEASE
SOFTWARE

RegIV_1010 uptime is 14 minutes
System restarted by reload
Running default software

cisco LS1010 (R4600) processor with 65536K bytes of memory.
R4700 processor, Implementation 33, Revision 1.0
Last reset from power-on
1 Ethernet/IEEE 802.3 interface(s)
10 ATM network interface(s)
123K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
 --More--
*Mar  6 18:49:26.159: %SYS-3-CPUHOG: Task ran for 4804 msec (50/0), process
= Exec, PC = 600A8E90.
-Traceback= 600A8E98 60038260 6003895C 60038374 60038118 6003895C 60038374
60057794 6004BAFC 600569F4 6009701Configuration register is 0x2102


I try to format the card and get the same error:

IV_1010#format slot0:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "slot0:".  Continue? [confirm]

%Error formatting slot0: (Error reading for erase check)
RegIV_1010#
*Mar  6 18:52:31.111: %SYS-3-CPUHOG: Task ran for 4844 msec (43/0), process
= Exec, PC = 600A8E90.
-Traceback= 600A8E98 60038260 6003895C 60038374 600CAEF4 6004BAFC 600569F4
6009701C 60097008

Any ideas on what's going on?

Thanks,
/bs