[c-nsp] Multicast RPF check and unicast default route [7:134602]

[Ibrahim Abo Zaid]

yes Rohynas that what i mean but my question is that work with multicast RPF
check or works for unicast only ?


best regards
--Ibrahim

On Sat, Mar 7, 2009 at 6:30 PM, Rohyans, Aaron <arohyans at dpsciences.com>wrote:

> I believe you're referring to:
>
> interface fastEthernet 0/0
>  ip verify unicast source reachable-via any
>
> ...this allows the router to use the default route for Reverse Path check.
>
> Hope this helps,
>
> Aaron T. Rohyans
> Senior Network Engineer
> CCIE #21945, CCSP, CCNA, CQS-Firewall, CQS-IDS, CQS-VPN, ISSP, CISP,
> JNCIA-ER
> DPSciences Corporation
> 7400 N. Shadeland Ave., Suite 245
> Indianapolis, IN 46250
> Office:  (317) 348-0099
> Fax:   (317) 849-7134
> arohyans at dpsciences.com
> http://www.dpsciences.com/
>
>
> -----Original Message-----
> From: nobody at groupstudy.com [mailto:nobody at groupstudy.com] On Behalf Of
> Ibrahim Abo Zaid
> Sent: Saturday, March 07, 2009 10:11 AM
> To: cisco at groupstudy.com
> Subject: Multicast RPF check and unicast default route [7:134602]
>
> Hi All
>
> i have a question about multicast RPF check that checks routing table for
> source address and ensure traffic incoming interface is the same as route
> next hop
>
> does this check supports default routes ? is there a feature like
> allow-default used in uRPF ?
>
>
> best regards
> --Ibrahim
>
>
>
>
> Message Posted at:
> http://www.groupstudy.com/form/read.php?f=7&i=134602&t=134602
> --------------------------------------------------
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
>
>